FAQ
Therapeutic Areas and Products
Pharmaceutical
Contact lenses
Other Alcon Products
Other Alcon Products
Alcon does not recommend use of expired product as safety and efficacy have not been established.
Pharmaceutical
Eysuvis Eye Drops
EYSUVIS is a white to off-white, milky, non-viscous suspension.
Inveltys Eye Drops
INVELTYS (loteprednol etabonate ophthalmic suspension) 1% is stable when stored upright at 15°C to 25°C (59°F to 77°F) with the pink cap tightly closed. INVELTYS should not be frozen. After opening, INVELTYS can be used until the expiration date on the bottle.
INVELTYS is manufactured in the U.S.A.
Simbrinza Eye Drops
Per the SIMBRINZA label, ""Shake well before use."" Brinzolamide and Brimonidine tartrate are white to yellow powders. SIMBRINZA is supplied as a sterile, aqueous suspension which has been formulated to be readily suspended following shaking. The appearance is white to off-white or milky.
If SIMBRINZA changes color from the above, it should not be used.
Alcon does not provide drop count data.
SIMBRINZA is available with an 8 mL fill, which is expected to provide an estimated one month of practical use when dosed in two eyes according to label directions.
Contact lenses
Contact Lens (CL)
- When about to place the lens on the eye, make sure the lens sits up on the placement finger. The finger should be dry so surface tension does not cause the lens to adhere to the finger.
- Check to see that the lens is right side out. A lens that is placed on the eye inside out may not feel comfortable or provide good vision.
One way to do this is to perform the 'taco test' by placing the lens between your thumb and index finger and squeeze the edges together gently.
- If the edges come together, the lens is right side out.
- If the edges turn outward, the lens is wrong side out. Carefully reverse it with your fingers.
Another way is to place the lens on the tip of your index finger and check its shape.
- If the edge appears bowl-shaped, it is right side out.
- If the edge has a lip or flares outward, it is wrong side out and must be reversed.
- Place the lens directly onto the cornea (placing it on the lower sclera can lead to the lens folding after a blink). While continuing to hold both lids in place, the patient should look down to seat the lens. The lids may then be released.
DAILIES TOTAL1 Multifocal
The DAILIES TOTAL1 Multifocal three ADD designations covers 8 spectacle ADD powers.
LO ADD covers +0.75, +1.00 and +1.25.
MED ADD covers +1.50, +1.75 and +2.00.
HI ADD covers +2.25 and +2.50.
DAILIES TOTAL1 Multifocal contact lenses are manufactured in Germany.
DAILIES TOTAL1
The packaging solution in the blister pack container of the DAILIES TOTAL1 contact lens does not contain a preservative ingredient.
DAILIES TOTAL1 Contact Lenses should be stored at room temperature. The United States Pharmacopeia (USP) defines room temperature as 15°C - 30°C (59°F - 86°F). Storage within this temperature range ensures the product will remain stable throughout its shelf life. We do not recommend storage of the product outside of the room temperature range.
PRECISION1
PRECISION1 (verofilcon A) spherical soft contact lenses are indicated for the optical correction of refractive ametropia (myopia and hyperopia) in phakic or aphakic persons with non-diseased eyes with up to approximately 1.50 diopters (D) of astigmatism that does not interfere with visual acuity.
The lenses are to be prescribed for single use, daily disposable wear. The lenses are not intended to be cleaned or disinfected and should be discarded after a single use.
The packaging solution in the blister pack container of the PRECISION1 contact lens does not contain a preservative ingredient.
Contact lens care solutions
CLEAR CARE
The CLEAR CARE Lens Case is not sold separately. The Lens Case (lens cup and platinum coated neutralizer disc) is specially designed for use only with CLEAR CARE Cleaning & Disinfecting Solution and must always be used together. For your convenience, a fresh new lens case is supplied with each solution purchase, regardless of size. For packages with more than 32 fl. oz. of CLEAR CARE Solution, an additional lens case is provided. Dispose of your old lens case with each new purchase of CLEAR CARE Solution.
The neutralizing disc is built into the CLEAR CARE and CLEAR CARE Plus HydraGlyde lens case and is not replaced separately. The disc is designed to last throughout the contents of the individual CLEAR CARE and CLEAR CARE Plus HydraGlyde carton. The entire lens case, including the disc, is replaced with each purchase as a new case is provided in every carton.
The CLEAR CARE and CLEAR CARE Plus HydraGlyde cup holds 10 ml of solution when filled to the fill line.
CLEAR CARE PLUS (with HydraGlyde)
The CLEAR CARE PLUS HydraGlyde Lens Case is not sold separately. The Lens Case (lens cup and platinum coated neutralizer disc) is specially designed for use only with CLEAR CARE PLUS Cleaning & Disinfecting Solution and must always be used together. For your convenience, a fresh new lens case is supplied with each solution purchase, regardless of size. For packages with more than 32 fl. oz. of CLEAR CARE PLUS Solution, an additional lens case is provided. Dispose of your old lens case with each new purchase of CLEAR CARE PLUS HydraGlyde Solution.
The neutralizing disc is built into the CLEAR CARE and CLEAR CARE Plus HydraGlyde lens case and is not replaced separately. The disc is designed to last throughout the contents of the individual CLEAR CARE and CLEAR CARE Plus HydraGlyde carton. The entire lens case, including the disc, is replaced with each purchase as a new case is provided in every carton.
The CLEAR CARE and CLEAR CARE Plus HydraGlyde cup holds 10 ml of solution when filled to the fill line.
OPTI-FREE PureMoist
For optimal results, follow these directions for care of your lenses with OPTI-FREE PUREMOIST Solution:
- Thoroughly wet each side of the lens with OPTI-FREE PUREMOIST Solution. Rub the lens for 20 seconds.
- Rinse each side of the lens for 10 seconds with a steady stream of OPTI-FREE PUREMOIST Solution.
- Fill your ALCON lens case with fresh OPTI-FREE PUREMOIST Solution. Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are ready to wear. If any debris remains on contact lenses, rinse with OPTI-FREE PUREMOIST Solution prior to lens insertion.
- You may leave your lenses in the unopened lens case containing OPTI-FREE PUREMOIST Solution for up to 30 days. After this time, your lenses must be cleaned and disinfected with OPTI-FREE PUREMOIST Solution prior to wear.
Always follow your eye care professional's instructions. Do not change your directions for care of your lenses or your care solution without consulting your eye car professional.
OPTI-FREE PUREMOIST bottles are made of PET plastic, recycle code #1. The cap is polypropylene, a class 5 recyclable material. The OPTI-FREE lens case is made of #5 polypropylene.
Alcon recommends checking with your local municipal recycling center for a list of materials accepted for recycling in your particular area.
Discard any remaining solution six months after first opening.
WARNING:
Using your OPTI-FREE PUREMOIST Solution beyond the discard date could result in contamination of the solution and can lead to severe infection, vision loss or blindness.
Important Safety Information:
Use before the expiration date marked on the carton and bottle.
OPTI-FREE Replenish
OPTI-FREE REPLENISH Multi-Purpose Disinfecting Solution is a sterile, buffered, isotonic, aqueous solution containing sodium citrate, sodium chloride, sodium borate, propylene glycol, TEARGLYDE proprietary dual action reconditioning system (TETRONIC 1304†, nonanoyl ethylenediaminetriacetic acid) with POLYQUAD (polyquatyernium-1) 0.001% and ALDOX (myristamidopropyl dimethylamine) 0.0005% preservatives.
†TETRONIC is a registered trademark of BASF.
The OPTI-FREE REPLENISH bottle is made of PET plastic (recycling code #1), with a polypropylene (#5) cap. Although the recycle logo is not imprinted, the OPTI-FREE Contact Lens Case is made of recyclable polypropylene #5 plastic.
Please speak with your municipal recycling center for which materials are recyclable in your area.
Please refer to the full package insert located in each box of OPTI-FREE REPLENISH.
To clean, recondition, disinfect and remove protein from your contact lenses:
- Thoroughly wet each side of the lens with OPTI-FREE REPLENISH Solution. Rub the lens for 20 seconds.
- Rinse each side of the lens for 10 seconds with a steady stream of OPTI-FREE REPLENISH Solution.
- Fill your ALCON Lens Case with fresh OPTI-FREE REPLENISH Solution.
- Store lenses in the closed lens case overnight or at least 6 hours. After soaking, lenses are ready to wear.
- If any debris remains on the contact lenses, rinse with OPTI-FREE REPLENISH Solution prior to lens insertion.
- You may leave your lenses in the unopened lens case containing OPTI-FREE REPLENISH Solution for up to 30 days. After this time, your lenses must be cleaned and disinfected with OPTI-FREE REPLENISH Solution prior to wear.
Your eyes are unique. Your eye care professional may recommend additional products to care for your lenses based upon your individual tear chemistry and lens-wearing schedule. Always follow your eye care professional's instructions. Do not change your directions for care of your lenses without consulting your eye care professional.
Over-the-Counter
Pataday Once Daily
Per the PATADAY Once Daily directions:
Do not use to treat contact lens related irritation.
- remove contact lenses before use
- wait at least 10 minutes before reinserting contact lenses after use
- do not wear a contact lens if your eye is red
Adults and children 2 years of age and older:
- put 1 drop in the affected eye(s) once daily, no more than once per day
- if using other ophthalmic products while using this product, wait at least 5 minutes between each product
- replace cap after each use
Children under 2 years of age: consult a doctor.
PATADAY Once Daily Relief (olopatadine hydrochloride) ophthalmic solution 0.2% antihistamine is preserved with benzalkonium chloride 0.01%.
Pataday Once Daily is manufactured in the USA.
Japan is the Country of Origin of the active ingredient (olopatadine).
Pataday Once Daily Extra Strength
The PATADAY Once Daily Extra Strength bottle is made of low-density polyethylene (LDPE, #4) with a polypropylene (PP, #5) cap.
Alcon recommends checking with your municipal recycling center for which materials are accepted for recycling in your region/area.
Pataday Once Daily Extra Strength is manufactured in the USA.
Japan is the Country of Origin of the active ingredient (olopatadine).
Pataday Twice Daily
Pataday (olopatadine hydrochloride) ophthalmic solution antihistamine is preserved with benzalkonium chloride 0.01%.
Pataday is manufactured in the USA.
Japan is the Country of Origin of the active ingredient (olopatadine).
Systane eye drops
The labeling for SYSTANE drops indicates the product should be stored at room temperature. The United States Pharmacopeia (USP) defines room temperature as 15°c - 30°c (59°F - 86°F). Storage of the sealed product within this temperature range ensures the product will remain stable throughout the shelf life indicated on the label. We do not recommend storage of the product outside of labeled conditions.
Systane Complete PF
The SYSTANE COMPLETE PF drop color is white to off-white, and the appearance is a uniform emulsion.
The first drop is to be dispensed and discarded before first using the product after opening only. This allows for proper flow of the product after opening.
Systane Balance
Systane Balance is an emulsion that is white in color. Due to it being an emulsion, it may also be described as a milky appearance.
The SYSTANE BALANCE bottle is made of Low Density Polyethylene (LDPE) and the lid/cap is made of Polypropylene (PP). The carton is made of recyclable paperboard materials. Please consult your municipal recycling center for additional information regarding recycling of materials in your location.
SYSTANE BALANCE Lubricant Eye Drops is not indicated to be used with contact lenses in the eye.
Systane Complete
The color of the SYSTANE COMPLETE drop is white to off-white, and the appearance is a uniform emulsion.
SYSTANE COMPLETE Preservative-Free (PF) multi-dose has a similar composition to SYSTANE COMPLETE, except for the absence of the preservative POLYQUAD (polyquaternium-1) and edetate disodium (EDTA). SYSTANE COMPLETE PF is preservative-free.
SYSTANE COMPLETE is made in the USA from domestic and imported materials.
Systane Gel Drops
SYSTANE Gel Drops is supplied in a Low Density Polyethylene (LDPE) plastic bottle and dispensing tip, with a polypropylene (PP) cap. Both materials are considered recyclable. Please check with your municipal recycling center for which materials are recyclable in your area.
Systane Hydration MDPF
SYSTANE HYDRATION Preservative-Free multi-dose is not indicated to be used while wearing contact lenses.
Please speak with your eye care professional regarding the most appropriate rewetting or lubricating eye drop for you depending on your medical history and the type of contact lenses you wear.
Systane Ultra
SYSTANE ULTRA lubricant eye drops is supplied in a Low Density Polyethylene (LDPE) plastic bottle and dispensing tip, with a polypropylene (PP) cap. Both materials are considered recyclable.
Need to contact us?
